Share this content on Facebook!
22 Oct 2015
Fall Protection
In fact, falls are considered the biggest safety risk for construction workers on most sites, especially the ones that require work on extremely elevated heights, for example bridge construction. Falls from high spots would be the number one cause of death in construction workers on construction sites.

Fall Arrest Systems
Construction safety related to fall protection contains an evaluation of the correct types of accessibility to the heights where the work must be done, security precautions followed at all times and being set in place, and often clearing the construction work area of all debris.

Clearing debris and gear is clearly a critical part of fall protection and fall prevention. Lots of fall accidents occur as a result of excessive debris and an excessive amount of equipment that's lying around. By simply placing things where they belong and keeping the main building work space free of additional "material," you are able to reduce a fantastic deal of mishaps that happen from falling and tripping. As an extra incentive, the after-work cleanup is going to be a lot easier and faster if you "clean and clear" as you go.

Furthermore, it's important that construction workers not become too overly confident as well as cocky while on the job, believing construction safety is "beneath" them or they do not desire the hassle of protective equipment and supplies when venturing out onto high places "for just a minute." Yet, a lot can happen in a minute, and this is actually when many fall accidents do occur, and without any fall protection, particularly safety harnesses, harms could not be much better and even deadly. Adequate and suitable protective equipment should be worn at all times while on the job. Finding the time before going out on the edge for a minute or two, to harness up could keep your life.

In order to make sure your fall protection gear, for example safety harnesses, retains its quality is secure and safe, and is operating to its maximum potential, it is vital that you follow along with a few storage and care guidelines:

Place such building safety equipment where it belongs to stop damage ( for instance, hang up harnesses; do not throw them on the floor). Keep them away from heat and chemicals. Check them every day for dirt /debris buildup and damage. Remove dirt accumulation with mild soap along with just a little warm water; hang dry. Remove damaged gear in the premises--damaged goods should not ever be utilized as a "second best" alternative. Gear that's been exposed to a fall must likewise be removed from the site and future service immediately.

Anchorage points on the building site needs to be regularly inspected as well for cracks or tears, weakening, excessive wear and tear, edges that were sharp, and routine acceptance. Roof stacks, ladders, guardrails, light fixtures, plumbing, rebar, and scaffolds should never be properly used as anchorage points.


Comments

There isn't any comment in this page yet!

Do you want to be the first commenter?


New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: